Each tile is 30.5cm x 30.5cm (3mm thickness)

Choose either pack 5 (0.47 sqm) or pack 10 (0.93sqm)

This is an easy peel and stick solution for updating your kitchen or bathroom splash-back, without having to grout. These premium composite self-adhesive wall tiles are very robust, with a scratch resistant surface, some designs include real metal and stone dust. With high end tile designs, they look and feel like real tiles with an embossed finish and are water resistant for wet areas, but not suitable for shower cubicles.

Application :- 1) Use to cover plain walls or existing splash-backs, no grouting required 2) Let the product acclimatize in the room for 48 hours prior to application 3) Allow 4 weeks for newly painted surfaces to fully cure, ensure surface is clean 4) Measure the area to be covered before ordering to ensure you order the right number of tiles 5) Remove the backing paper prior to application, these tiles have a strong PE adhesive, so spray water on the reverse of the tile (on the adhesive side) this will help when repositioning 6) Tiles are interlinked together and can be cut with a cutter, utility knife or shears, simply score and snap

Aftercare :- 1) Seal any edges of the tiles if using in wet areas, using clear or white silicone sealant 2) Avoid using harsh abrasive chemicals 3) Splashes wipe off effortlessly, but remove spillages that may stain e.g. curry 4) Remove tiles by using a flat headed screwdriver to carefully prise the tile away from the surface. Clean away any remaining adhesive residue with warm soapy water 5) Keep away from direct heat like a gas hob 6) Robust scratch resistant surface